Ceiling Grid and Blank panels

TripleAir offer various grades of suspended grid systems to suit a wide of applications including ISO Classification 1-9 (ISO14644-1) and compliant with loading and fire ratings demanded for critical areas, reaction to Fire EuroClass 1, A2-S1,dO, Harmonised Technical Specification 13501-1,13501.2, 13964-2004: EN13964:2004/A12:2006, EN1090-1. Available in epoxy powder coated or anodised extruded aluminium with either zinc cast or pressed joints and suitable for both Dryseal or Fluidseal. Triple Air offer assistance with design and load calculations and a single source for ease of construction compatibility.

We offer various options of ceiling panels (tiles) to suit room applications including walk on, acoustic panels, steel panels (various gauges to suit room pressures) and clips to hold the panels in place if required. If the room has a requirement for a sprinkler system, we can accommodate this using either our HD55-70 grid or 60-65 Gel Grid supplied with precision die cast joints which can facilitate the use of sprinkler heads or cable entry glands. Our grid systems are widely used in semi-conductor manufacturing, high tech and micro-electronics, pharmaceutical areas, LAF’s and data centres.

TripleAir compatible products include:

Fan Filter Units
Hood Filters
Knife Edge Filters (Pressurised Plenum)
Teardrop and recessed luminaires
Terminal Housings
Walk on and Non-Walk on blank ceiling panels

Gel 60-65 Grid

Gel 60-65 Grid

  • Cleanrooms, Small LAF’s Through to Full Ballroom Fabs
  • Urethane and silicon gel options
  • For cleanrooms Class 1 to 9 (ISO14644-1)
  • Heavy Duty Modular designed high tensile, high deflection strength.
  • Suitable for Knife Edge Filters
  • Walk on construction
  • Extruded Aluminium and Die Cast Zinc joints
55-70 Walk on Grid

55-70 Walk on Grid

  • Cleanrooms, Small LAF’s Through to Full Ballroom Fabs
  • Heavy Duty Modular designed high tensile, high deflection strength.
  • Walk on Ceiling Panels
  • For Non-Pressurised plenum applications (FFU/Hood Filters)
  • Cruciform Joints with knock out provision for sprinkler heads and other services
  • EPDM Gaskets
HD 55-70-2 RSC

HD 55-70-2 RSC

  • Cleanrooms, Small LAF’s Through to Full Ballroom Fabs
  • Grid system to facilitate room side change (RSC) of Hepa Filters
  • Roomside installation and removal of Fan Filter Units
  • Supplied with clip-in closing profiles to hold the filter and fan unit.
  • Heavy Duty Modular Frame system construction with high tensile, high deflection strength.
  • For Non-Pressurised applications (FFU/Hood Filters)
HD 55-70 Non Walk on Grid

HD 55-70 Non Walk on Grid

  • Cleanrooms, Small LAF’s Through to Full Ballroom Fabs
  • Heavy Duty Frame system construction with high tensile, high deflection strength.
  • Consisting of 3000mm long main T profile and cut to size noggins (cross T)
  • For Non Pressurised plenum applications
  • Extruded Aluminium and Pressed Top joints
MD 55-37 Non Walk on Grid

MD 55-37 Non Walk on Grid

  • Cleanrooms, Small LAF’s Through to Full Ballroom Fabs
  • Frame construction, in a nodal system to allow grid modules of 600 x 1200 centres, other grid modules can be provided
  • Consisting of 3000mm long main T profile and cut to size noggins (cross Tees)
  • For Non-Pressurised applications
  • mulitiple modular filter bank options for higher airflow